You need to make sure there are good batteries in the clock and they are inserted in the proper direction. In addition, extreme heat can damage the unit if it is subjected to direct sunlight.Ĭonstantly taking out your batteries isn’t going to help a clock that won’t catch the signal. There is nothing we can do if your batteries are freezing. Even though your transmitter may be rated for a certain temperature, your batteries could be freezing up and need to be changed or your batteries may simply not be able to function under certain conditions. If your outdoor transmitter is not functioning under extreme weather conditions you should check the manual for the parameters for your model. If your units are functioning properly, then don’t change the batteries until you lose the outdoor temperature or the display on the clock is fading. TX means there is a low battery in the transmitter. RX means there is a low battery in the clock. Try changing the batteries to see if this corrects the problem. If your clock is showing an incomplete display or acting irrationally then it could mean your batteries are low. Use only Duracell alkaline batteries for optimal performance. Please test your batteries or use a fresh set before making a final determination that there is a problem with the clock or transmitter. Do not use rechargeable or lithium batteries in the SkyScan clocks and transmitters. We have encountered just-bought batteries straight from the package that were no good or even corroded in the package. Unfortunately this is not a manufacturer defect as the manufacturer has no control over the use of batteries, and you will need to replace the units at your own cost.Įven though batteries are fresh out of the package that does not mean they are good, especially if the package has been sitting in a drawer for a couple years. If you are still having problems with your clock or transmitter after cleaning the contacts, then the corrosion may have irreversibly damaged the unit. Check the batteries several times per year to make sure there is no corrosion and keep the unit in a dry, shady place to protect it. Reinsert fresh batteries and restart the clock according to the restart procedure for your model. If you see blue/green or whitish powder in the battery compartment of the clock or transmitter then you should immediately remove the damaged batteries and clean the contacts with a soft cloth or toothbrush. If batteries are allowed to leak, the corrosion can damage the units. Skyscan Atomic Clocks®, are engineered to meet tough environmental and industry demands while maintaining their trademark simplicity and user-friendly interfaces.Battery corrosion can be a big problem for the atomic clocks and transmitters. Our clocks give you access to the latest technology. We take pride in offering our customers superior product quality. It ensures daily accuracy to the fraction of a second by refreshing the signal each day. The SkyScan® Atomic Clock automatically sets itself to the correct time and date by receiving and decoding the NIST radio signal with an internal receiver. Using a low frequency radio transmission from NIST, the US Atomic Clock sends an accurate time signal across the continental United States. This clock is operated by the National Institute of Standards and Technology (NIST) in Fort Collins, Colorado. The US Atomic Clock is the most accurate clock in the world and the official national timepiece.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |